HOME > Products > Tabletop (Hand-Operated) Impulse Sealers > P-200 / PC-200

P-200 / PC-200

Tabletop Impulse Sealer

The most basic, easy-to-use tabletop impulse sealer

Photo of P-200

p-200

Photo of PC-200 with cutter mechanism

pc-200

Details of each icon: 

Main Features

Applications and Features:

Tabletop, hand-operated

Another name:

POLYSEALER®

Operating method:

Hand-operated

Packaging type:

Seal only

Daily use frequency as model selection guideline:

Up to 1,000 bags, hand-operated

Bag size:

Up to 20 cm/ 7.8 inches

Latest type:

Type C

Compatible packaging materials (total thickness of two or more sheets):

PE : 0.2 mm (7.9 mil),

PP : 0.2 mm (7.9 mil),

NY : 0.1 mm (3.9 mil),

PVA : 0.1 mm (3.9 mil),

other laminated materials : 0.1 mm (3.9 mil)


Overview of P-200, PC-200 series

P-200 is a tabletop type impulse sealer with the sealing length of 20 cm.
Simply press down on the lever to create the beautiful sealing.
Adjust the seal timer dial depending on the thickness of the film and it is ready to use.

PC-200 comes with the cutting blade to cut off any excess material from the end of the bag.


Notification Lamp Ending Sound

Sealing process can be visually confirmed by notification lamp.
Lamp turns red during heating. It turns blue during cooling which is vital for beautiful seals.
When the lamp turns off, a beep sound will be heard, indicating the sealing is complete.

Conceptual illustration of lamp color.

Simple operation

Use the heating-time adjuster knob facing you to set the appropriate heating time for the bag.
Lower the clamping lever using one hand. The heating light will turn on. Sealing is completed when you hear a brief beeping sound.

Good for a variety of packaging materials

This is a single heater sealer capable of sealing materials up to 0.2 mm thick (total thickness of overlapping sheets).

Easy maintenance

The heating element and other relatively frequently replaced parts are easily replaced by removing the Teflon-sheet holder. Simply remove the Teflon-sheet holder using a flat-head screwdriver.

Good for 2mm seals and fusion-cut seals

The sealer comes equipped with a 2 mm heating element when it is shipped from the factory.
The 2mm heating element may be replaced with a fusion-cut heating element as needed to create fusion-cut seals.
For details on how to replace the heating elements, please refer to the Instruction Manual.
A fusion-cut seal is created by using a piano-wire-like heating element to melt and cut the film. Although the films are slightly fused together, there is hardly any strength in the sealing.

A variety of applications

It is ideal for individual packaging at stores, and for small packaging of parts and food materials at plants. The compact body takes up minimal space and is very mobile.

Photo of PC-200

Cutter mechanism: PC-200

On a PC sealer, the user can slide the cutter knob after the sealing is completed to cut off any excess material from the end of the bag. This cutter feature can be used to create multiple bags from tube-shaped film.

Photo of PC-200

HOME > Products > Tabletop (Hand-Operated) Impulse Sealers > P-200 / PC-200