HOME > Products > Long Size Impulse Sealers > FiF Series

FiF Series

Foot Operated Lons Size Sealer

Foot Opereated Sealer for Large Size Packaging

Photo of FiF-1000

Details of each icon: 

I-Heating Element

Main Features

Applications and Features:

Extra-length sealer

Operating method:

Foot-operated

Packaging type:

Seal only

Daily use frequency as model selection guideline:

Up to 1,000 bags, foot-operated

Bag size

80cm (31.5 inches), 1m (39.4 inches), 1.2m (47.2 inches),1.5m (59.1 inches)

Latest type

Type A

Compatible packaging materials (total thickness of two or more sheets):

Single-side heating type:

PE : 0.4 mm (15.7 mil),

PP : 0.3 mm (11.8 mil),

NY : 0.3 mm (11.8 mil),

PVA : 0.3 mm (11.8 mil),

other laminated materials : 0.4 mm (15.7 mil)

Double-side heating type:

PE : 0.6 mm (23.6 mil),

PP : 0.4 mm (15.7 mil),

NY : 0.4 mm (15.7 mil),

PVA : 0.4 mm (15.7 mil),

other laminated materials : 0.5 mm (19.7 mil)


Overview of the FiF series

FiF series is an foot pedal opereated sealer capable of making seals of 0.8 to 1.5 meters.
Set the heating time for the bag being used, and lightly step on the foot pedal to produce a clean, strong seal.
FiF series can create a seal on locations other than the end of a bag. C type with cutting mechanism can be used for tube-shaped film to make simple bags.


Simple operation

Use the timer to adjust the heating time for the material and thickness of the packaging material or bag to be sealed, and lightly step on the pedal to create a clean, strong seal.
Because film and bag can pass through the heating area for sealing, a seal can be created on locations other than the end of a bag. This allows the sealer to also make simple bags.
The FiF series of sealers comes standard-equipped with a table convenient for sealing operation.

Use of I-heating element

Use of I-heating element, which expands relatively little when heated, reduces the chance of the heating element breaking in the middle. Its use also prolongs the life of peripheral components such as the temperature sensor that comes in contact with the heating element.

Click here to learn more about I-Heating Elemnt.

A comprehensive product lineup

We offer a comprehensive lineup of models to accommodate a variety of bag sizes (widths), thickness and materials.
Different models are available for seal lengths of 1000, 1200 and 1500 mm (3.3, 3.9 and 4.9 ft), as well as for seal widths of 5 and 10 mm (1/5 and 2/5 inches).
In addition to a single heater type capable of sealing materials up to 0.3 mm thick (total thickness of overlapping sheets), there is a double heater type capable of sealing thick or laminated bags up to 0.4mm thick (total thickness of overlapping sheets).

  Type C featuring a cutting mechanism

The C type is equipped with a cutting mechanism to cut excess bag (film) ends. Slide the cutter knob sideways in either direction to cut the tube-shaped film after sealing it.

  Type 10C for in-between cuts

The 10C type uses a cutting heater to cut through the centerline of the sealed area. It can be used to seal and cut apart the tube-shaped film at the same time to make bags.

  Melt-cut type

The melt-cut type can be used for processing bags in which a round-wire melt-cutting heater is used to cut the bag (film). Although the melt-cutting heater slightly fuses the film together, there is hardly any sealing strength.

Safety Measures

Casters with a locking mechanism

The FiF series of sealers comes standard-equipped with casters with a locking mechanism that make moving from one work area to another easy, while providing a steady work setting once the machine is situated.

HOME > Products > Long Size Impulse Sealers > FiF Series